An estimated 2, 850 people die and 15, 900 individuals are injured annually because of fires in residences. Though more than 90 percent of homes have smoke alarms, millions of homes have alarms that don’t work. Missing or dead batteries are the primary cause for non working smoke alarms – U.S. Consumer Product Safety Commission. What’s the ideal way to prevent smoke alarms and carbon monoxide alarm ion batteries from being pilfered to be used in another device? Carbon monoxide alarm as well as smoke alarm manufacturers provide battery compartment designs which are standard, Tamper resistant, or Sealed. Tamper resistant battery chargers are usually secured by the installer with a threadless plastic pin or a plastic tab provided by the alarm manufacturer.
The pin and tab can be disabled with your finger, and the standard or lithium ion batteries readily removed. Sealed battery compartments contain lithium batteries which are factory soldered and sealed inside the base of the unit. A carbon monoxide and smoke alarm’s lithium ion batteries must be Factory sealed to prevent the house occupants or guests from robbing the ion batteries and making the alarm inoperable. The CO and smoke alarms which we install have a battery compartment that’s factory sealed.
Should we also secure the alarm body to its mounting plate or the wall with a tamper resistant screw? If a tamper resistant screw is utilized to secure the alarm to the mounting plate or wall, then the renter must be given the security instrument so the alarm can be removed when it expires after five to 10 years. In case the renter who has the instrument moved, or the tool is misplaced, then the agency or contractor would need to return to the workplace at the suitable time to remove the alarm for the current occupants. In case the battery compartment isn’t factory sealed, as well as a single tamper resistant screw is utilized to secure the battery compartment as well as the alarm to the mounting plate or wall with the security instrument, the occupants would be able skill to pilfer the batteries and disable the alarm. When the battery compartment is factory sealed, the occupants are prevented from removing the alarm’s lithium ion batteries to be used in other devices. To prevent returning to the jobsite to uninstall the CO or smoke alarm when it expires, the alarm itself needs to be fixed to the mounting plate or wall with standard screws. With our broad range of coverage of healthy indoor environments, and desire to publish quickly information to gain the community, mistakes are inevitable.